Toroidal Power Line Common Mode Choke 2 x 0.7mH Inductance 5A With Base

2*0.7mH Toroidal Common Mode Power Line Choke with Base

Description:

The choke coil is a common mode interference suppression device with ferrite as the core. It is symmetrically wound on the same ferrite toroidal core by two coils of the same size and the same number of turns to form a four-terminal. The device, as shown, has a suppressive effect on the large-mode signal for the common-mode signal, and has little effect on the differential-mode signal exhibiting a small leakage inductance. The choke coil can effectively suppress the common mode interference signal (such as lightning interference) in the balanced line, but has no effect on the differential mode signal that the line normally transmits.

E General information:
It is recommended that the temperature of the part does
not exceed +125°C under worst case conditions.
• Storage Temperature: -20°C to 60°C
• Operating Temperature: -40°C to 125°C
• Temperature Rise: < 55K
• Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently

Similar Product: 

common mode toroidal chokes

common mode power line choke

Toroidal Power Line Common Mode Choke 2 x 0.7mH Inductance 5A With Base Images